China best Process Gas Compressor Air Compressor air compressor for car

Product Description

Company Profile

  •  ZheJiang CHINAMFG Lihua Technology Development Co., Ltd. is located in the political center, economic center, cultural center, international exchange center, science and technology innovation center, and the capital city of ZheJiang in China. We are specialized in providing international famous brands: Atlas Copco, CHINAMFG Rand, Sullair, Bolaite, and Switzerland Vantone laboratory equipment.

        Compressors include: screw compressors, high-pressure compressors, petroleum compressors, natural gas compressors, process gas compressors, oil-free screw compressors, and centrifugal compressors.
        Laboratory equipment: integrated Karl Fischer moisture titrator, integrated automatic potentiometric titrator, automatic Karlscher Coulometry moisture meter, ECO intelligent ion chromatograph.
       We have over 10000 high-quality compressor spare parts in stock for you to choose from!

Product Description

Application industry:
It is widely used in industries such as petroleum, chemical, fertilizer, metallurgy, industrial gases, gas, and food.
Main features:
1. This series of compressors is produced and manufactured with the product technology of Mannes Mandermag Company in Germany. It is a domestic piston compressor unit.
2. The product has the characteristics of low noise, low vibration, compact structure, smooth operation, safety and reliability, and high level of automation. It can also be configured with data-driven remote display and control systems according to customer requirements.
3. It has an alarm and shutdown function for low oil pressure, low water pressure, high temperature, low intake pressure, and high exhaust pressure of the compressor, making the operation of the compressor more reliable.
4. All products are oil-free lubricated compressors, and the compression medium is oil-free.
Flow rate: 10-1800 Nm ³/ HR
Exhaust pressure: ≤ 15 MPa
Media: Special gas compressors are used as boosting equipment for various toxic and harmful media such as natural gas, liquefied gas, petroleum associated gas, hydrogen, argon, ethylene, propylene, propane, chloroform, chloroethane, epoxyethane, vinylidene fluoride, carbon monoxide, ammonia, dimethyl ether, carbon dioxide, coal gas, etc;
Control: PLC automatic control
Drive mode: Motor cooling mode: Air cooling, water cooling, mixed cooling
Installation method: trailer mobile, container pry, fixed
 

Detailed Photos

Product Parameters

Technical parameters and specifications
 

Model specifications Air displacement
Nm3/h
Intake pressure
Mpa
Exhaust pressure
Mpa
Motor Power
kw
External dimensions
mm
ZW-3/2-3 480 0.2 0.3 11 1400×900×1250
ZW-5.5/2-6 900 0.2 0.6 45 2000×1600×1250
ZW-2/20 110 Atmospheric pressure 2.0 22 2600×1800×1550
VW-3/20 165 Atmospheric pressure 2.0 37 2800x1800x1750
VW-4/20 220 Atmospheric pressure 2.0 45 2800x1800x1750
VW-5/20 285 Atmospheric pressure 2.0 55 2800x1800x1750
VW-6/20 330 Atmospheric pressure 2.0 75 2800x1800x1750
VW-6.8/30 370 Atmospheric pressure 3.0 75 2800x1800x1750
VW-8/20 570 Atmospheric pressure 2.0 90 2800x1800x1750
VW-12.5/25 750 Atmospheric pressure 2.5 132 3200x1800x1750
VW-22.5/8 1200 Atmospheric pressure 0.8 160 4800x2200x1550
VW-45/8 2400 Atmospheric pressure 0.8 280 4800x2200x1600
VW-22.5/22 1200 Atmospheric pressure 2.2 200 4800x2200x1750
VW-28/22 1550 Atmospheric pressure 2.2 250 4800x2200x1750
VW-36/22 2000 Atmospheric pressure 2.2 315 4800x2200x1750
VW-45/22 2500   2.2 400 4800x2200x1750
DW-32/0.05-3 1800 0.05 0.3 132 4200x2200x1500
DW-30/2-8 4900 0.2 0.8 280 4800x2500x1300
DW-16.5/0.5-45 1350 0.5 4.5 250 4800x2200x1800
DW-3.2/17-48 3150 1.7 4.8 160 4800x2200x1800

 

Certifications

Packaging & Shipping

Packaging Options for Your Goods
When it comes to packing your goods, we offer 3 different options to suit your specific requirements. You can choose from the following:

  1. Original Package: We can pack your goods using the original packaging, ensuring that they are protected and presented just as they were intended.
  2. Custom Design Package: If you have a specific design in mind for your packaging, we can accommodate that as well. Simply provide us with your design, and we will pack your goods accordingly.
  3. Blank Package: Alternatively, we can pack your goods using our blank packaging. This option allows for a clean and simple presentation, with no specific design elements.

Please refer to the example below for a visual representation of our blank packaging:
Whether you choose to package your product in original packaging, your own design, or our blank packaging, you can trust that your product will be handled carefully and pay attention to details. We strive to provide the best packaging options to meet your needs.
4.Transportation options:For your convenience, we offer various transportation methods, including air freight, sea freight, and express delivery services, such as DHL, FedEx,TNT, etc. Choose the option that best suits your needs.

Our Advantages

         We have been specializing in the compressor industry for 17 years! We are specialized in providing international famous brands: Atlas Copco, CHINAMFG Rand, Sullair, Bolaite, and Switzerland Vantone laboratory equipment.Whether you need screw compressors, oil-free screw compressors, centrifugal compressors, or spare parts, we can meet your needs. We have over 10000 types of accessories, from complete compressors to compressor accessories, everything! Welcome to experience the convenience and reliability of our products.

     We not only provide compressor products from internationally renowned brands, but also international brand Swiss CHINAMFG laboratory equipment such as integrated Karl Fischer moisture titrator, fully automatic cartridge Coulomb moisture analyzer, integrated automatic potentiometric titrator, and ECO intelligent ion chromatograph. You no longer need to search everywhere, because we have everything you need here! Our goal is to provide you with the best service and the highest quality products. Whether you are an individual user or a corporate customer, we will be dedicated to serving you. Let’s find the best solution for your needs together!

FAQ

Q1: How can I get the quotation?
A: you can advise us the part number for checking, and we will quote to you soon by email
Q2: What kind of ways for transportation ?
A:In general by air, sea or Express.(like DHL,Fedex,TNT,etc.)
Q3: If i want to change model,size,package,etc. How can I do?
A:You can contact us by or mail, and we will revise according to your requirement
Q4: How do I know the quality of productions?
A:We have a strict series of quality control, and we have perfect after service system, which can help you to solve the problem soon
Q5: What is the terms of payment ?
A:WeChat, Alipay,T/T, Western Union, paypal
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Angular
Structure Type: Open Type
Compress Level: Multistage
Customization:
Available

|

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

Can Gas Air Compressors Be Used for Sandblasting?

Yes, gas air compressors can be used for sandblasting. Sandblasting is a process that involves propelling abrasive materials, such as sand or grit, at high speeds to clean, etch, or prepare surfaces. Here’s a detailed explanation:

1. Compressed Air Requirement:

Sandblasting requires a reliable source of compressed air to propel the abrasive material. Gas air compressors, particularly those powered by gasoline or diesel engines, can provide the necessary compressed air for sandblasting operations. The compressors supply a continuous flow of compressed air at the required pressure to propel the abrasive material through the sandblasting equipment.

2. Portable and Versatile:

Gas air compressors are often portable and can be easily transported to different job sites, making them suitable for sandblasting applications in various locations. The portability of gas air compressors allows flexibility and convenience, especially when sandblasting needs to be performed on large structures, such as buildings, tanks, or bridges.

3. Pressure and Volume:

When selecting a gas air compressor for sandblasting, it is essential to consider the required pressure and volume of compressed air. Sandblasting typically requires higher pressures to effectively propel the abrasive material and achieve the desired surface treatment. Gas air compressors can provide higher pressure outputs compared to electric compressors, making them well-suited for sandblasting applications.

4. Compressor Size and Capacity:

The size and capacity of the gas air compressor should be chosen based on the specific requirements of the sandblasting project. Factors to consider include the size of the sandblasting equipment, the length of the air hose, and the desired duration of continuous operation. Selecting a gas air compressor with an appropriate tank size and airflow capacity ensures a consistent supply of compressed air during sandblasting.

5. Maintenance Considerations:

Regular maintenance is crucial for gas air compressors used in sandblasting applications. The abrasive nature of the sand or grit used in sandblasting can introduce particles into the compressor system, potentially causing wear or clogging. Regular inspection, cleaning, and maintenance of the compressor, including filters, valves, and hoses, help prevent damage and ensure optimal performance.

6. Safety Precautions:

When using gas air compressors for sandblasting, it is essential to follow appropriate safety precautions. Sandblasting generates airborne particles and dust, which can be hazardous if inhaled. Ensure proper ventilation, wear appropriate personal protective equipment (PPE), such as respiratory masks, goggles, and protective clothing, and follow recommended safety guidelines to protect the operator and others in the vicinity.

In summary, gas air compressors can be effectively used for sandblasting applications. They provide the necessary compressed air to propel abrasive materials, offer portability and versatility, and can deliver the required pressure and volume for efficient sandblasting operations. Proper compressor selection, maintenance, and adherence to safety precautions contribute to successful and safe sandblasting processes.

air compressor

What Safety Precautions Should Be Taken When Operating Gas Air Compressors?

Operating gas air compressors safely is essential to prevent accidents, injuries, and equipment damage. It’s important to follow proper safety precautions to ensure a safe working environment. Here’s a detailed explanation of the safety precautions that should be taken when operating gas air compressors:

1. Read and Follow the Manufacturer’s Instructions:

Before operating a gas air compressor, carefully read and understand the manufacturer’s instructions, user manual, and safety guidelines. Follow the recommended procedures, maintenance schedules, and any specific instructions provided by the manufacturer.

2. Provide Adequate Ventilation:

Gas air compressors generate exhaust fumes and heat during operation. Ensure that the operating area is well-ventilated to prevent the accumulation of exhaust gases, which can be harmful or even fatal in high concentrations. If operating indoors, use ventilation systems or open windows and doors to allow fresh air circulation.

3. Wear Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment (PPE) when operating a gas air compressor. This may include safety glasses, hearing protection, gloves, and sturdy footwear. PPE helps protect against potential hazards such as flying debris, noise exposure, and hand injuries.

4. Perform Regular Maintenance:

Maintain the gas air compressor according to the manufacturer’s recommendations. Regularly inspect the compressor for any signs of wear, damage, or leaks. Keep the compressor clean and free from debris. Replace worn-out parts and components as needed to ensure safe and efficient operation.

5. Preventive Measures for Fuel Handling:

If the gas air compressor is powered by fuels such as gasoline, diesel, or propane, take appropriate precautions for fuel handling:

  • Store fuel in approved containers and in well-ventilated areas away from ignition sources.
  • Refuel the compressor in a well-ventilated outdoor area, following proper refueling procedures and avoiding spills.
  • Handle fuel with caution, ensuring that there are no fuel leaks or spills near the compressor.
  • Never smoke or use open flames near the compressor or fuel storage areas.

6. Use Proper Electrical Connections:

If the gas air compressor requires electrical power, follow these electrical safety precautions:

  • Ensure that the electrical connections and wiring are properly grounded and in compliance with local electrical codes.
  • Avoid using extension cords unless recommended by the manufacturer.
  • Inspect electrical cords and plugs for damage before use.
  • Do not overload electrical circuits or use improper voltage sources.

7. Secure the Compressor:

Ensure that the gas air compressor is securely positioned and stable during operation. Use appropriate mounting or anchoring methods, especially for portable compressors. This helps prevent tipping, vibrations, and movement that could lead to accidents or injuries.

8. Familiarize Yourself with Emergency Procedures:

Be familiar with emergency procedures and know how to shut off the compressor quickly in case of an emergency or malfunction. Have fire extinguishers readily available and know how to use them effectively. Develop an emergency action plan and communicate it to all personnel working with or around the compressor.

It’s crucial to prioritize safety when operating gas air compressors. By following these safety precautions and using common sense, you can minimize the risks associated with compressor operation and create a safer work environment for yourself and others.

China best Process Gas Compressor Air Compressor   air compressor for carChina best Process Gas Compressor Air Compressor   air compressor for car
editor by CX 2024-05-14

Recent Posts