China Energy Saving 132kw/175HP Permanent Magnet Screw Air Compressor & Rotary Air Compressor at-132A-Zpm mini air compressor

Product Description

Product Description:

The screw air compressor is composed of a pair of parallel and intermeshing woman and male screws. It is the most extensively utilised rotary compressor.
There are 2 types of solitary-screw and twin-screw. Typically talking, the screw compressor refers to the twin-screw compressor. It was 1st proposed by the German H. Krigar in 1878. It was not until finally 1934 by A. Lysholm of the Royal Institute of Technology in Sweden that the technology was established, and it began to be utilized in market and reached fast growth.

Item Image:

Product Specification:
 

Model AT-75A-ZPM AT-100A-ZPM AT-120A-ZPM AT-150A-ZPM AT-175A-ZPM
Air Shipping (m3/min)/ Pressur(Mpa) ten./.seven thirteen.4/.7 sixteen.2/.7 21/.7 24.5/.7
nine.6/.8 12.6/.eight 15./.8 19.8/.eight 23.2/.eight
8.5/ten eleven.2/1. 13.8/1. seventeen.4/1. 20.5/1.
seven.6/twelve ten./1.2 twelve.3/1.two 14.8/1.two seventeen.4/1.two
Cooling Method Air Cooling
Lubrication Quantity(L) 65 90
Driving Method Direct Driven
Voltage 220-440V50/60Hz
Power(KW/HP) 55/75 75/100 90/one hundred twenty one hundred ten/a hundred and fifty 132/a hundred seventy five
Start Program Variable Frequency Starting up
Size(cm) 176*126*156 176*126*156 240*148*185
Bodyweight 950 1050 1200 1800 2200
Outlet dimensions two” 2″ 2&1/2″

Product Parameters:

Item Specifics:

New technology of substantial-successful Airend
one.Sophisticated and energy preserving spiral tooth-variety technology.
2.New Sort 5:6 asymmetrical rotator tooth kind.
3.Energy improved by far more than 5%-10% in air dischage when in comparison to other regular equipment.

Substantial -productive electricity method
1.PM motor adopts large-functionality NdFeB, which will not get rid of magnetism below 200ºC and its support life reaches as long as 15 several years.
two.Coaxial structure design and style,generate performance of bearingless composition is a hundred%.
three.No standard grease injection, no substitution of bearings on a typical basis.
four.The motor is little in dimensions, minimal noise,low in vibratio and clean in operation.

High-Performance Inverter
1.Geared up with high frequency reactor, reducing the frequency converter.
two.Decreases CZPT present when it is started out, realizes secure commencing.
three.Can be immediately change the pace of the Motor accoring to your true requirement, Power conserving up to 35%.

Substantial Effective oil and gasoline speraration technique
with the globe renowned model apoda oil and fuel sperarator, lessen the oil content material of the compressor exhaust gas and the oil content of the unit energy intake is only 1-2PPM.

Clever handle system
1.Multi-Language can be switched according to your necessity.
2.With security functions up to 12 types, such as overload,limited circuit,low temperature, in excess of voltage and so on.
3.Basically and very clear, easy to function.

Solution Installation Diagram:

Product Software:
Workshop Show:

Our Rewards:

Manufacturing unit Overview:

World-wide Marketplace:

FAQ:

1.Q:Can you provide the samples to us?
    A: yes, we can offer the sample to you in cost-free, but the price of the freight on your account.

two. Q:Can you do the order according to the buyer necessity?
     A:Sure, we can do the order according to your sample or drawings, OEM/ODM services presented.

three. Q:What is your delivery time?
    A:Normally, it is 7 times if the products are in inventory. It will  will take about fifteen-25days if the merchandise are not in stock, Primarily depends on the get quantity.

4.Q:What is your phrases of payment?
    A:Usually thirty% worth of items as deposit, harmony amount against the copy of the BL.

5. Q: How extended is the guarantee ?
     A: fourteen months because the container transported apart from fast-use areas.

US $10,600-12,500
/ Set
|
1 Set

(Min. Order)

###

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model AT-75A-ZPM AT-100A-ZPM AT-120A-ZPM AT-150A-ZPM AT-175A-ZPM
Air Delivery (m3/min)/ Pressur(Mpa) 10.0/0.7 13.4/0.7 16.2/0.7 21/0.7 24.5/0.7
9.6/0.8 12.6/0.8 15.0/0.8 19.8/0.8 23.2/0.8
8.5/10 11.2/1.0 13.8/1.0 17.4/1.0 20.5/1.0
7.6/12 10.0/1.2 12.3/1.2 14.8/1.2 17.4/1.2
Cooling Method Air Cooling
Lubrication Volume(L) 65 90
Driving Mode Direct Driven
Voltage 220-440V;50/60Hz
Power(KW/HP) 55/75 75/100 90/120 110/150 132/175
Start System Variable Frequency Starting
Size(cm) 176*126*156 176*126*156 240*148*185
Weight 950 1050 1200 1800 2200
Outlet size 2" 2" 2&1/2"
US $10,600-12,500
/ Set
|
1 Set

(Min. Order)

###

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model AT-75A-ZPM AT-100A-ZPM AT-120A-ZPM AT-150A-ZPM AT-175A-ZPM
Air Delivery (m3/min)/ Pressur(Mpa) 10.0/0.7 13.4/0.7 16.2/0.7 21/0.7 24.5/0.7
9.6/0.8 12.6/0.8 15.0/0.8 19.8/0.8 23.2/0.8
8.5/10 11.2/1.0 13.8/1.0 17.4/1.0 20.5/1.0
7.6/12 10.0/1.2 12.3/1.2 14.8/1.2 17.4/1.2
Cooling Method Air Cooling
Lubrication Volume(L) 65 90
Driving Mode Direct Driven
Voltage 220-440V;50/60Hz
Power(KW/HP) 55/75 75/100 90/120 110/150 132/175
Start System Variable Frequency Starting
Size(cm) 176*126*156 176*126*156 240*148*185
Weight 950 1050 1200 1800 2200
Outlet size 2" 2" 2&1/2"

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Energy Saving 132kw/175HP Permanent Magnet Screw Air Compressor & Rotary Air Compressor at-132A-Zpm     mini air compressorChina Energy Saving 132kw/175HP Permanent Magnet Screw Air Compressor & Rotary Air Compressor at-132A-Zpm     mini air compressor
editor by czh 2022-12-08

Recent Posts