China High Stability LPG Biogas Helium Petroleum Gas Compressor Price for Sale

Product Description

HangZhou CZPT Gas Equipment Co.,Ltd, exporting diaphragm compressor, piston compressor, oxygen generator, gas cylinder and nitrogen generators with good quality and low price.

Piston compressor is a kind of piston reciprocating motion to make gas pressurization and gas delivery compressor mainly consists of working chamber, transmission parts, body and auxiliary parts. The working chamber is directly used to compress the gas, the piston is driven by the piston rod in the cylinder for reciprocating motion, the volume of the working chamber on both sides of the piston changes in turn, the volume decreases on 1 side of the gas due to the pressure increase through the valve discharge, the volume increases on 1 side due to the reduction of air pressure through the valve to absorb the gas.

Compressor for unloading and loading
Product description
This ZW series of oil-free compressors is 1 of the first products produced by our factory in China. The compressors have the advantage of low rotating speed, high component strength, stable operation, long service life and convenient maintenance. It is consist of compressor, gas-liquid separator, filter, two-position four-way valve, safety valve, check valve, explosion-proof motor and base etc. It has the characteristics of small size, light weight, low noise, good sealing, easy installation and easy operation.
This compressor is mainly used for unloading, loading, dumping, residual gas recovery and residual
liquid recovery of LPG/C4, propylene and liquid ammonia. It is widely used in gas, chemical,
energy and other industries, and is a key equipment in gas, chemical, energy and other
industries.

Note: In the process of unloading, the compressor pressurizes the gas from the storage tank and
then presses it into the tanker through the gas phase line, and presses the liquid from the tanker
to the storage tank through the pressure difference of the gas phase to complete the unloading
two process. When the gas phase is pressurized, the temperature of the gas phase will rise. At this
time, it is not necessary to force it to cool, because if the gas phase is compressed and then
cooled, it is easy to liquefy, and the pressure difference of the gas phase is difficult to establish,
which is not conducive to the replacement of the gas phase and the liquid phase. In short, it will
prolong the unloading process time. If residual gas recovery is required, during the residual gas
recovery operation, a cooler can be selected for forced cooling of the gas phase, so as to recover
the residual gas as soon as possible.
The loading process is the opposite of the unloading process.

Propane-Butane Mix Compressor

Number Type Power(kW) Dimension (mm) Loading or unloading (t/h)
  1.  
ZW-0.6/16-24 11 1000×680×870 ~15
  1.  
ZW-0.8/16-24 15 1000×680×870 ~20
  1.  
ZW-1.0/16-24 18.5 1000×680×870 ~25
  1.  
ZW-1.5/16-24 30 1400×900×1180 ~36
  1.  
ZW-2.0/16-24 37 1400×900×1180 ~50
  1.  
ZW-2.5/16-24 45 1400×900×1180 ~60
  1.  
ZW-3.0/16-24 55 1600×1100×1250 ~74
  1.  
ZW-4.0/16-24 75 1600×1100×1250 ~98
  1.  
VW-6.0/16-24 132 2400×1700×1550 ~147

Inlet pressure:≤1.6MPa
Outlet pressure: ≤2.4MPa
Max differential pressure: 0.8MPa
Maximum Instantaneous Pressure Ratio:≤4
Cooling method: Air cooling

The unloading volume is calculated according to the inlet pressure of 1.6MPa, the outlet
pressure of 2.4MPa, the inlet temperature of 40 ºC , and the density of propylene liquid of
614kg/m3. When the working conditions change, the unloading volume will change accordingly,
which is for reference only.

 Piping and Instrumentation Diagram of gas unloading  
 Liquid delivery
At the beginning, open the liquid phase pipeline between the tanker and the storage tank. If the liquid level in the tanker is higher than the storage tank, it will automatically flow into the storage tank. When the balance is reached, the flow will stop. If the liquid phase of the tanker is lower than the storage tank, directly start the compressor, the four-way valve is in the positive position, and the gas is extracted from the storage tank by the compressor and then discharged into the tanker. At this time, the pressure in the tank car rises, the pressure in the storage tank drops, and
the liquid in the tank car flows into the storage tank. (as shown below)

 Surplus liquid recovery
The residual liquid recovery process is the opposite of liquid transfer. After the liquid is delivered, the four-way valve should be reversed, and the dotted line in the figure is closed. At this time, the remaining gas in the tanker is inhaled by the compressor, pressurized and then discharged to the storage tank until the pressure of the remaining gas drops to no recovery value. When recycling, pay attention that the compressor pressure ratio and exhaust temperature cannot exceed the allowable values.

The working principle of the four-way valve
                   

Pull the handle of the four-way valve, when the four-way valve is in the position shown in Figure a, the A side is the intake air, and the gas flows from A to B, through the pipe, the intake filter part, the compressor intake pipe, the compressor, The compressor discharge pipe, the D end flows to the C end, and the C end is the exhaust end.
When the four-way valve is in the position of Figure B, the C end is the intake air, and the gas flows from the C end to the B end, through the pipe, the intake filter part, the compressor intake pipe, the compressor, the compressor exhaust pipe, and the D end It flows to end A, which is the exhaust end.

Reference example for selection and calculation of Propane-Butane Mix unloading compressor
.Selection of compressor inlet and outlet pressure
Saturated vapor pressure of Propane-Butane Mix at 20~36ºC

Temperature(ºC) Atmosphere Temperature(ºC) Atmosphere
20 8.4585 30 11.512
22 9.0125 32 12.212
24 9.5940 34 12.943
26 10.2040 36 13.708
28 10.8430    

In the case of high temperature, the saturated vapor pressure of Propane-Butane Mix is high, so the 16barg (inlet pressure)-24barg (outlet pressure) model is selected to meet the use environment when the temperature is high.
Note: The unit of pressure is kg/cm2

 

  • Compressor Flow Calculation

The specific flow calculation is more complicated and needs to be finally determined according to the calculation formula and experience. Only a simple calculation method is introduced here.

1. Calculate the volume of the tanker
According to the provided operating conditions, first determine the total volume flow required to unload the 15-ton Propane-Butane Mix tanker in 1 hour.
The specific gravity of Propane-Butane Mix is 0.618, so the volume of 15 tons of Propane-Butane Mix is: 15 ÷0.618=24.272m3; and since the tanker is not allowed to be full, it is generally about 80% of the tanker’s volume. The volume is 24.272+15×0.2=27.272, so the volume of the tanker should be 30m3.

2.Calculate flow
When the compressor is unloading, the pressure difference must first be established before the Propane-Butane Mix can be unloaded from the tanker to the storage tank. Generally, the time to establish the pressure difference is 15 minutes, so the actual unloading time is only about 45 minutes, that is, the required displacement is 30 ÷ 45 = 0.66667m3/min; and after the gas is pressurized from 16kg to 24kg by the compressor, the volume will be reduced to about 0.66667 (16 ÷ 24) of the original volume, then the compressor displacement is: 0.66667 ÷ 0.66667 =1m3/min

According to the above calculation, the compressor model is selected as ZW-1.1/16-24

Choosing an Air Compressor

Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
air-compressor

Positive displacement

There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses 2 lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other 1 to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.

Oil-injected

Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these 2 air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
air-compressor

Oil-free

When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in 1 minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.

Single-stage

A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses 2 valves – 1 for inlet and 1 for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is 1 that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
air-compressor

Low-noise

A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase 1 with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise 1 is an excellent choice.

China High Stability LPG Biogas Helium Petroleum Gas Compressor Price for Sale  China High Stability LPG Biogas Helium Petroleum Gas Compressor Price for Sale

Recent Posts