China Oil-Free Lubrication M Type Balanced Opposed CO2 Compressor Carbon Dioxide Compressor Reciprocating Piston Gas Compressor

Product Description

COMPRESSOR PHOTOS:   

Before we make the technical plan and offer you the reasonable quotation, please let me know your request for the compressor you need as below:

1. compressed medium & gas composition  2. flow rate(NM3/H) 3. inlet pressure(Bar.G) 4. discharge pressure(Bar.G) 5. gas inlet temperature(ºC) 6. do you have any request for the discharge temperature ? 7. cooling method: water cooling or air cooling ? (do you have the water resource on site ? ) 8. do you need cabin for the compressor ? (if the compressor used outdoor or in very cold area) 9. do you have any other request ? do you need any certain brands for the main parts ? such as the instrument and motor.

TECHNICAL PARAMETERS FOR COMPRESSORS: 
 

product model  compressed medium  nominal volume flow(m3/min) suction pressrue(MPa.G) discharge pressure(MPa.G)  motor power  overall dimension(mm)  weight 
VW-2/7.72-34 CH4 2 0.772 3.4 18.5kw  4000*2200*1800 4T 
DW-12/0.02-20 mixed gas  12 0.002 2 132kw   5000*2850*2500 9.5T 
DW-12/0.02-20 special gas   12 0.002 2 132kw   5000*2850*2500 9.5T 
VW-2/(2-3.4)-(12-13.8) coking gas  2 0.2-0.34 1.2-1.38 22kw   4500*2200*1800 4.5T 
VW-12/0.02-10 regeneration gas 12 0.002 1 22kw   4500*2200*1800 4.5T 
VWF-10/(0.5-2)-10 associated gas 10 0.05-0.2 1 315kw  6500*2700*3250 16T 
DW-1/6-35 CO/carbon monoxide 1 0.6 3.5 37kw  3800*2000*1800 5T 
DW-9.1/(2-3)-16 natural gas  9.1 0.2-0.3   1.6 185kw  5000*3200*2400 7T 
VW-0.54/4-16 O2/oxygen 0.54 0.4 1.6 11kw  2700*1700*1600 3T 
VW-3/40 air  3 Atmospheric pressure 4 45kw  3000*2100*1800 4.5T 
ZW-2.0/10-16 LPG/liquid gas 2 1 1.6 30kw  1800*1000*1200 1T 
ZW-2.0/10-16 NH3/ammonia 2 1 1.6 30kw  1800*1000*1200 1T 
DWF-3.95/10 H2/hydrogen 3.95 Atmospheric pressure 1 30kw  4500*3000*2500 6.8T 
MW-8.4/6-80 CO2/carbon dioxide 8.4 0.6 8 450kw  7000*3200*2850 20T 
MW-8.4/(2-6)-39 BOG  8.4 0.2-0.6 3.9 400kw  4500*3200*2500 18T 
MFW-16.6/6-20 N2/nitrogen 16.6 0.6 2 400kw  4500*3200*1900 17T 
MF-6.2/3-250 CNG  6.2 0.3 25 315kw  7000*2700*3250 19T 
VF-0.26/(30-200)-250  CNG  0.26 3-20 25 75kw   5600*2500*2400 9T 

COMPANY PROFILE: 

The gas as following can be compressed by our reciprocating piston gas compressor: air, nitrogen, hydrogen, oxygen, carbon dioxide, carbon monoxide, natural gas, Bog (after LNG reheating), regeneration gas, associated gas, mixed gas, coking gas, desorbed gas, methane, CNG, LPG, ammonia, propylene oxide, propane, Propylene, Butadiene, helium, Methyl chloride.

our piston compressors are using latest generation of PLC control system, remote touch screen display and transmitter monitoring, so that the compressor operation is more safe and reliable.

So our compressor is worth your trust and as it is of high quality with competitive price.

reciprocating piston gas compressor, PLC control system, remote touch screen display and transmitter monitoring.

FAQ: 
1)Are you trading company or manufacturer ?
We are manufacturer of reciprocating piston gas compressor for about 20years.
 

2)where is your factory located ?
We are located at HangZhou City, ZheJiang Province, China.
 

3)What’s your delivery time of compressor ?
About 30-120days according to actual request.
 

4) How long can your compressors be used ?
Generally, more than 20 years.
 

5) How long your compressor warranty ?
Usually 12 Months for whole compressor machine. And we can provide further warranty if necessary.

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China Oil-Free Lubrication M Type Balanced Opposed CO2 Compressor Carbon Dioxide Compressor Reciprocating Piston Gas Compressor  China Oil-Free Lubrication M Type Balanced Opposed CO2 Compressor Carbon Dioxide Compressor Reciprocating Piston Gas Compressor

Recent Posts